MAX3232EIPW vs MAX3232EIPWRQ1 Vergleich
Detaillierter Direktvergleich von MAX3232EIPW von Texas Instruments und MAX3232EIPWRQ1 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3232EIPWRQ1 ✓ AktivSpezifikationsvergleich
| Parameter | MAX3232EIPW | MAX3232EIPWRQ1 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | Dual RS-232 line driver/receiver with dual charge pump | — |
| Number of Transmit Channels | 2 channels | — |
| Number of Receive Channels | 2 channels | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbit/s |
| ESD Protection | ±15 kV IEC ESD, pin-to-pin | ±15 kV IEC, pin-to-pin |
| RS-232 Compliance | TIA/EIA-232-F | — |
| Interface Direction | Full duplex | — |
| Gehäuse | 16-pin TSSOP | 16-pin TSSOP |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Input Logic Voltage | [DATA_NEEDED: input logic voltage threshold] | — |
| Output Logic Voltage | [DATA_NEEDED: output logic voltage level] | — |
| Driver Output Swing | [DATA_NEEDED: RS-232 output swing] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Charge-Pump Capacitors | [DATA_NEEDED: recommended charge-pump capacitance] | — |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Transceiver Configuration | — | 2/2 full-duplex |
| Interface Standard | — | ITU V.28 |
| Charge-Pump Supply Outputs | — | V+ and V− |
| Standby Current | — | 300 µA typical |
| Automotive Qualification | — | AEC-Q100 qualified |
| Package Width | — | 4.40 mm |
| Package Length | — | 0.173 in |
| Packaging | — | Tape and reel |