MAX3232IDBR vs MAX3232ECDB Comparison
Detailed side-by-side comparison of MAX3232IDBR by Texas Instruments and MAX3232ECDB by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX3232IDBR - 250kbps Dual RS-232 Transceiver | Texas Instruments
MAX3232IDBR ✓ ActiveSpecification Comparison
| Parameter | MAX3232IDBR | MAX3232ECDB |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual RS-232 line driver/receiver | — |
| Number of Drivers | 2 channels | 2 |
| Number of Receivers | 2 channels | 2 |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| ESD Protection | ±15 kV | — |
| Operating Temperature Range | -40°C to +85°C | — |
| Package | 16-pin SSOP (DB) | 16-SSOP (DB, 0.209 in / 5.30 mm width) |
| Package Width | 5.30 mm | — |
| Package Length | 0.209 inch | — |
| Mounting Type | Surface mount | Surface Mount |
| Moisture Sensitivity Level | MSL 1 at 260°C/ unlimited floor life | — |
| RoHS Compliance | RoHS3 compliant | — |
| REACH Compliance | Not specified | — |
| Lifecycle Status | Active | — |
| Manufacturer Lead Time | 6 weeks | — |
| Automotive Qualification | Not specified | — |
| Charge-Pump Capacitors | [DATA_NEEDED: recommended charge-pump capacitor values] | — |
| Supply Bypass Capacitor | [DATA_NEEDED: recommended supply bypass capacitor value] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Driver Output Voltage | [DATA_NEEDED: RS-232 output voltage levels] | — |
| Protocol | — | RS-232 |
| Type | — | Transceiver |
| Data Rate | — | 250 kbps (minimum) |
| ESD Protection (RS-232 Bus Pins) | — | ±15 kV (HBM) |
| ESD Protection (IEC 61000-4-2) | — | ±15 kV contact discharge / ±15 kV air-gap discharge |
| Standard Compliance | — | TIA/EIA-232-F |
| Operating Temperature | — | 0C to +70C |
| Packaging | — | Tube |
| External Capacitors Required | — | 4 x 0.1 uF (charge pump) |
| Lead Free Status | — | [DATA_NEEDED: lead free status] |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |