MC34911G5AC vs MC33911G5AC Comparison
Detailed side-by-side comparison of MC34911G5AC by NXP Semiconductors and MC33911G5AC by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MC34911G5AC - LIN SBC, DC Motor Predriver, 5V/60mA LDO | NXP
MC34911G5AC ✓ ActiveNXP Semiconductors
MC33911G5AC - LIN SBC with 5V LDO & DC Motor Pre-Driver
MC33911G5AC ⚠ Last Time BuySpecification Comparison
| Parameter | MC34911G5AC | MC33911G5AC |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Voltage Regulators | Power MOSFET Drivers |
| Lifecycle Status | Active | Last Time Buy |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.35 | $3.17 |
| Function | System Basis Chip (SBC) with LIN Transceiver, LDO, and DC Motor Pre-Driver | LIN System Basis Chip (SBC) with DC Motor Pre-driver |
| Communication Interface | LIN 2.x / 2.1 compliant + SPI control | — |
| Transceiver | 1 LIN channel | — |
| Number of LDOs | 1 | — |
| LDO Output Voltage | 5.0 V (±2%) | — |
| LDO Output Current | 60 mA (max) | 50 mA typ (60 mA peak) |
| Motor Driver | DC motor pre-driver (low-side / high-side) | — |
| ESD Performance (LIN pin) | ±6.0 kV min (IEC 61000-4-2 contact, 150 pF / 330 ohm) | — |
| Operating Voltage | [DATA_NEEDED: battery/VSUP range] | — |
| Sleep Quiescent Current | [DATA_NEEDED: typ sleep Iq value] | — |
| Operating Temperature | [DATA_NEEDED: AEC grade temp range] | -40 °C to +125 °C |
| Package | LQFP-32 (7x7 mm) | 32-LQFP (7x7 mm) |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| RoHS Status | [DATA_NEEDED] | — |
| AEC-Q100 Qualification | [DATA_NEEDED] | — |
| Packaging Format | Tray | — |
| Communication Protocol | — | LIN 2.x (LIN 2.0/2.1/2.2A compliant) |
| On-board LDO Output | — | 5.0 V |
| DC Motor Pre-driver | — | Yes (integrated half-bridge pre-driver) |
| Host Interface | — | SPI (4-wire, full-duplex) |
| Supply Voltage (VBAT) | — | 5.5 V to 27 V |
| Load Dump Tolerance | — | Up to 40 V (external TVS recommended above 27 V) |
| Supply Current | — | 4.5 mA (typical, normal mode) |
| Watchdog | — | Programmable window watchdog (SPI-configured) |
| ESD (LIN pin, contact) | — | ±6.0 kV min (IEC 61000-4-2 gun test, 150 pF / 330 ohm) |
| Lead Free / RoHS | — | Lead Free per DigiKey listing |