MC34911G5AC vs MC33911G5AC Comparación
Comparación detallada lado a lado de MC34911G5AC por NXP Semiconductors y MC33911G5AC por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MC34911G5AC - LIN SBC, DC Motor Predriver, 5V/60mA LDO | NXP
MC34911G5AC ✓ ActivoNXP Semiconductors
MC33911G5AC - LIN SBC with 5V LDO & DC Motor Pre-Driver
MC33911G5AC ⚠ Última compraComparación de especificaciones
| Parámetro | MC34911G5AC | MC33911G5AC |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Voltage Regulators | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Última compra |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $3,35 | $3,17 |
| Función | System Basis Chip (SBC) with LIN Transceiver, LDO, and DC Motor Pre-Driver | LIN System Basis Chip (SBC) with DC Motor Pre-driver |
| Communication Interface | LIN 2.x / 2.1 compliant + SPI control | — |
| Transceiver | 1 LIN channel | — |
| Number of LDOs | 1 | — |
| LDO Output Voltage | 5.0 V (±2%) | — |
| LDO Output Current | 60 mA (max) | 50 mA typ (60 mA peak) |
| Motor Driver | DC motor pre-driver (low-side / high-side) | — |
| ESD Performance (LIN pin) | ±6.0 kV min (IEC 61000-4-2 contact, 150 pF / 330 ohm) | — |
| Operating Voltage | [DATA_NEEDED: battery/VSUP range] | — |
| Sleep Quiescent Current | [DATA_NEEDED: typ sleep Iq value] | — |
| Temperatura de funcionamiento | [DATA_NEEDED: AEC grade temp range] | -40 °C to +125 °C |
| Encapsulado | LQFP-32 (7x7 mm) | 32-LQFP (7x7 mm) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| Estado RoHS | [DATA_NEEDED] | — |
| AEC-Q100 Qualification | [DATA_NEEDED] | — |
| Packaging Format | Tray | — |
| Communication Protocol | — | LIN 2.x (LIN 2.0/2.1/2.2A compliant) |
| On-board LDO Output | — | 5.0 V |
| DC Motor Pre-driver | — | Yes (integrated half-bridge pre-driver) |
| Host Interface | — | SPI (4-wire, full-duplex) |
| Supply Voltage (VBAT) | — | 5.5 V to 27 V |
| Load Dump Tolerance | — | Up to 40 V (external TVS recommended above 27 V) |
| Corriente de alimentación | — | 4.5 mA (typical, normal mode) |
| Watchdog | — | Programmable window watchdog (SPI-configured) |
| ESD (LIN pin, contact) | — | ±6.0 kV min (IEC 61000-4-2 gun test, 150 pF / 330 ohm) |
| Lead Free / RoHS | — | Lead Free per DigiKey listing |