MC908QT1ACPE vs MC68HC908QT2MDW Comparison

Detailed side-by-side comparison of MC908QT1ACPE by NXP Semiconductors and MC68HC908QT2MDW by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MC908QT1ACPE MC908QT1ACPE - 8-Bit HC08 1.5KB Flash MCU | NXP | DIP-8

MC908QT1ACPE - 8-Bit HC08 1.5KB Flash MCU | NXP | DIP-8

MC908QT1ACPE ✓ Active

Specification Comparison

Parameter MC908QT1ACPE MC68HC908QT2MDW
Brand NXP Semiconductors NXP Semiconductors
Category Microcontrollers Microcontrollers
Lifecycle Status Active NRND
Stock Status In Stock In Stock
Unit Price (USD) $2.30 $1.05
Core Processor HC08 (CPU08) —
Core Size 8-bit —
Core Architecture CISC, Von Neumann M68HC08 (8-bit CISC, Von Neumann)
Maximum Bus Frequency 8 MHz 8 MHz (internal bus)
Program Memory Size 1.5 KB (1.5K x 8) —
Program Memory Type FLASH —
RAM Size 128 bytes (128 x 8) —
EEPROM Size None —
Number of I/O Pins 5 (6 per datasheet, 5 usable GPIO) —
Supply Voltage (Vcc/Vdd) 4.5 V to 5.5 V —
Peripherals LVD, POR, PWM, Timer —
Connectivity None (no UART/SPI/I2C) —
Package Type 8-PDIP (PE), 0.300 inch / 7.62 mm —
Operating Temperature Range Industrial (-40C to +85C) per datasheet prefix 'C' —
Mounting Type Through-Hole (THT) —
Lead Free / RoHS Lead free per PE suffix marking —
MSL Level Not specified for PDIP - not moisture sensitive —
Family — HC08 (QT2 sub-family of QY)
Program Memory (Flash) — 2 KB
RAM — 128 bytes
Supply Voltage Range — 3 V to 5 V (typical, per HC08 spec)
Operating Temperature — Automotive grade (-40C to +125C)
ADC — [DATA_NEEDED: ADC channel count and resolution for QT2MDW specifically]
Timers — 16-bit timer with input capture / output compare (per QY family header)
Watchdog — Yes (COP watchdog, on-chip)
Brown-out Reset — Yes (on-chip low-voltage detect)
Low-power Modes — Wait and Stop modes
Package — SOEIAJ / SO-8 (gull-wing, 8 terminals)
Pin Count — 8
Debug Interface — Single-wire BDM (background debug mode) on IRQ/TCLK
Programming — On-chip Monitor ROM / in-application programming
RoHS Status — [DATA_NEEDED]
AEC-Q100 — Automotive grade MDW suffix per Freescale part-number convention

Datasheets & Resources

Browse All Products Create BOM Request Quote