MC908QT1ACPE vs MC68HC908QT2MDW Vergleich

Detaillierter Direktvergleich von MC908QT1ACPE von NXP Semiconductors und MC68HC908QT2MDW von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

NXP Semiconductors
MC908QT1ACPE MC908QT1ACPE - 8-Bit HC08 1.5KB Flash MCU | NXP | DIP-8

MC908QT1ACPE - 8-Bit HC08 1.5KB Flash MCU | NXP | DIP-8

MC908QT1ACPE ✓ Aktiv

Spezifikationsvergleich

Parameter MC908QT1ACPE MC68HC908QT2MDW
Marke NXP Semiconductors NXP Semiconductors
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv NRND
Lagerstatus In Stock In Stock
Stückpreis (USD) $2,30 $1,05
Core Processor HC08 (CPU08) —
Core Size 8-bit —
Core Architecture CISC, Von Neumann M68HC08 (8-bit CISC, Von Neumann)
Maximum Bus Frequency 8 MHz 8 MHz (internal bus)
Program Memory Size 1.5 KB (1.5K x 8) —
Program Memory Type FLASH —
RAM Size 128 bytes (128 x 8) —
EEPROM Size None —
Number of I/O Pins 5 (6 per datasheet, 5 usable GPIO) —
Supply Voltage (Vcc/Vdd) 4.5 V to 5.5 V —
Peripherals LVD, POR, PWM, Timer —
Connectivity None (no UART/SPI/I2C) —
Package Type 8-PDIP (PE), 0.300 inch / 7.62 mm —
Betriebstemperaturbereich Industrial (-40C to +85C) per datasheet prefix 'C' —
Montageart Through-Hole (THT) —
Lead Free / RoHS Lead free per PE suffix marking —
MSL-Level Not specified for PDIP - not moisture sensitive —
Family — HC08 (QT2 sub-family of QY)
Program Memory (Flash) — 2 KB
RAM — 128 bytes
Supply Voltage Range — 3 V to 5 V (typical, per HC08 spec)
Betriebstemperatur — Automotive grade (-40C to +125C)
ADC — [DATA_NEEDED: ADC channel count and resolution for QT2MDW specifically]
Timers — 16-bit timer with input capture / output compare (per QY family header)
Watchdog — Yes (COP watchdog, on-chip)
Brown-out Reset — Yes (on-chip low-voltage detect)
Low-power Modes — Wait and Stop modes
Gehäuse — SOEIAJ / SO-8 (gull-wing, 8 terminals)
Pin-Anzahl — 8
Debug Interface — Single-wire BDM (background debug mode) on IRQ/TCLK
Programming — On-chip Monitor ROM / in-application programming
RoHS-Status — [DATA_NEEDED]
AEC-Q100 — Automotive grade MDW suffix per Freescale part-number convention

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern