MK40DX64VLK7 vs MK60DN512ZVLQ10 Comparison
Detailed side-by-side comparison of MK40DX64VLK7 by NXP Semiconductors and MK60DN512ZVLQ10 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MK40DX64VLK7 - Kinetis K40 72MHz Cortex-M4 MCU 64KB Flash | NXP
MK40DX64VLK7 ✓ ActiveNXP Semiconductors
MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60DN512ZVLQ10 NrndSpecification Comparison
| Parameter | MK40DX64VLK7 | MK60DN512ZVLQ10 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | NRND |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $4.32 | $9.30 |
| Core | ARM Cortex-M4 | — |
| Core Architecture | ARMv7-M (Thumb/Thumb-2) | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 72 MHz | 100 MHz |
| Program Flash | 64 KB (64K x 8) | — |
| SRAM | 16 KB | 128 KB |
| Package | 80-LQFP (12x12 mm) | — |
| Operating Voltage | 1.8 V / 2.5 V / 3.3 V | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| Segment LCD Controller | Yes (up to 8x40 segments) | — |
| USB | Full-Speed USB OTG with on-chip transceiver | — |
| ADC | 16-bit SAR, up to 1 MSPS | 16-bit, multiple channels |
| DAC | 12-bit DAC x2, 6-bit high-speed DAC | 12-bit |
| Timers | FTM, PIT, LPTMR, RTC | Multiple FTM, PIT, LPTMR, RTC |
| Communication | UART x3, SPI x2, I2C x2, I2S, CAN | — |
| External Bus | FlexBus (external memory interface) | — |
| Storage Interface | SDHC host controller | — |
| DMA Channels | 16-channel eDMA | — |
| Low-Power Modes | Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLS0/1 | — |
| GPIOs | [DATA_NEEDED: GPIO count] | — |
| RoHS Status | Compliant | Compliant |
| Program Flash Memory | — | 512 KB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| Operating Temperature Range | — | -40 C to +105 C |
| Package Type | — | 144-LQFP (20x20 mm) |
| Ethernet MAC | — | 10/100 Mbps with IEEE 1588 |
| USB Controller | — | USB 2.0 Full-Speed, Device/Host/OTG |
| CAN Modules | — | 1 x CAN |
| Communication Peripherals | — | UART, SPI, I2C, I2S |
| LCD Controller | — | Yes (segment and dot-matrix) |
| Pin Count | — | 144 |
| Mounting Type | — | Surface Mount |
| MSL Level | — | 3 (per JEDEC J-STD-020) |