MK40DX64VLK7 vs MK60DN512ZVLQ10 Comparaison
Comparaison détaillée côte à côte de MK40DX64VLK7 par NXP Semiconductors et MK60DN512ZVLQ10 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MK40DX64VLK7 - Kinetis K40 72MHz Cortex-M4 MCU 64KB Flash | NXP
MK40DX64VLK7 ✓ ActifNXP Semiconductors
MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60DN512ZVLQ10 NrndComparaison des spécifications
| Paramètre | MK40DX64VLK7 | MK60DN512ZVLQ10 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,32 | $9,30 |
| Core | ARM Cortex-M4 | — |
| Core Architecture | ARMv7-M (Thumb/Thumb-2) | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 72 MHz | 100 MHz |
| Program Flash | 64 KB (64K x 8) | — |
| SRAM | 16 KB | 128 KB |
| Boîtier | 80-LQFP (12x12 mm) | — |
| Operating Voltage | 1.8 V / 2.5 V / 3.3 V | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Segment LCD Controller | Yes (up to 8x40 segments) | — |
| USB | Full-Speed USB OTG with on-chip transceiver | — |
| ADC | 16-bit SAR, up to 1 MSPS | 16-bit, multiple channels |
| DAC | 12-bit DAC x2, 6-bit high-speed DAC | 12-bit |
| Timers | FTM, PIT, LPTMR, RTC | Multiple FTM, PIT, LPTMR, RTC |
| Communication | UART x3, SPI x2, I2C x2, I2S, CAN | — |
| External Bus | FlexBus (external memory interface) | — |
| Storage Interface | SDHC host controller | — |
| DMA Channels | 16-channel eDMA | — |
| Low-Power Modes | Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLS0/1 | — |
| GPIOs | [DATA_NEEDED: GPIO count] | — |
| Statut RoHS | Compliant | Compliant |
| Program Flash Memory | — | 512 KB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| Plage de température de fonctionnement | — | -40 C to +105 C |
| Package Type | — | 144-LQFP (20x20 mm) |
| Ethernet MAC | — | 10/100 Mbps with IEEE 1588 |
| USB Controller | — | USB 2.0 Full-Speed, Device/Host/OTG |
| CAN Modules | — | 1 x CAN |
| Communication Peripherals | — | UART, SPI, I2C, I2S |
| LCD Controller | — | Yes (segment and dot-matrix) |
| Nombre de broches | — | 144 |
| Type de montage | — | Surface Mount |
| Niveau MSL | — | 3 (per JEDEC J-STD-020) |