MK64FN1M0VLL12 vs MK64FN1M0VLQ12 Comparison
Detailed side-by-side comparison of MK64FN1M0VLL12 by NXP Semiconductors and MK64FN1M0VLQ12 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ ActiveNXP Semiconductors
MK64FN1M0VLQ12 - 120MHz Cortex-M4F MCU 1MB Flash LQFP-144 | NXP
MK64FN1M0VLQ12 ✓ ActiveSpecification Comparison
| Parameter | MK64FN1M0VLL12 | MK64FN1M0VLQ12 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $7.95 | $9.74 |
| Manufacturer | NXP Semiconductors | — |
| Series | Kinetis K64 | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP) | — |
| Core Size | 32-bit | 32-bit |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash | — |
| RAM Size | 256 KB SRAM | — |
| Flash Memory Type | FTFE - Non-Flex (4 KB sector, 8-byte phrase) | — |
| Supply Voltage (VDD) | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) | — |
| Operating Temperature Range | -40 C to +105 C (industrial) | -40C to +105C (industrial) |
| Package / Case | 100-LQFP, 14x14 mm, 0.5 mm pitch | — |
| Mounting Type | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed OTG, on-chip FS transceiver | USB 2.0 Full-Speed OTG with on-chip PHY (crystal-less capable) |
| Ethernet | 10/100 Mbps MAC, MII / RMII interface | 10/100 Mbps MAC with IEEE 1588 hardware timestamping (MII/RMII) |
| Hardware Cryptography | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG | — |
| ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) | 2 x 16-bit SAR ADCs, up to 818 ksps (12-bit mode) |
| DAC | 12-bit | 1 x 12-bit DAC |
| GPIO | [DATA_NEEDED: GPIO count for this LQFP-100 mask] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | 3 (per JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| Core | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Program Memory | — | 1 MB (1M x 8) Flash |
| SRAM | — | 256 KB |
| Package | — | 144-LQFP (20x20 mm) |
| Timers/PWM | — | FlexTimer (FTM), Programmable Delay Block (PDB), Periodic Interrupt Timer (PIT) |
| Serial Interfaces | — | 3 x SPI, 4 x I2C, 6 x UART, 1 x CAN, 1 x I2S/SAI |
| Operating Voltage | — | 1.71 V to 3.6 V (single supply) |