MK64FN1M0VLL12 vs MK64FN1M0VLQ12 Comparaison
Comparaison détaillée côte à côte de MK64FN1M0VLL12 par NXP Semiconductors et MK64FN1M0VLQ12 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ ActifNXP Semiconductors
MK64FN1M0VLQ12 - 120MHz Cortex-M4F MCU 1MB Flash LQFP-144 | NXP
MK64FN1M0VLQ12 ✓ ActifComparaison des spécifications
| Paramètre | MK64FN1M0VLL12 | MK64FN1M0VLQ12 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,95 | $9,74 |
| Manufacturer | NXP Semiconductors | — |
| Series | Kinetis K64 | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP) | — |
| Core Size | 32-bit | 32-bit |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash | — |
| RAM Size | 256 KB SRAM | — |
| Flash Memory Type | FTFE - Non-Flex (4 KB sector, 8-byte phrase) | — |
| Supply Voltage (VDD) | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) | — |
| Plage de température de fonctionnement | -40 C to +105 C (industrial) | -40C to +105C (industrial) |
| Boîtier / Format | 100-LQFP, 14x14 mm, 0.5 mm pitch | — |
| Type de montage | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed OTG, on-chip FS transceiver | USB 2.0 Full-Speed OTG with on-chip PHY (crystal-less capable) |
| Ethernet | 10/100 Mbps MAC, MII / RMII interface | 10/100 Mbps MAC with IEEE 1588 hardware timestamping (MII/RMII) |
| Hardware Cryptography | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG | — |
| ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) | 2 x 16-bit SAR ADCs, up to 818 ksps (12-bit mode) |
| DAC | 12-bit | 1 x 12-bit DAC |
| GPIO | [DATA_NEEDED: GPIO count for this LQFP-100 mask] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | 3 (per JEDEC J-STD-020) | 3 (per JEDEC J-STD-020) |
| Core | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Program Memory | — | 1 MB (1M x 8) Flash |
| SRAM | — | 256 KB |
| Boîtier | — | 144-LQFP (20x20 mm) |
| Timers/PWM | — | FlexTimer (FTM), Programmable Delay Block (PDB), Periodic Interrupt Timer (PIT) |
| Serial Interfaces | — | 3 x SPI, 4 x I2C, 6 x UART, 1 x CAN, 1 x I2S/SAI |
| Operating Voltage | — | 1.71 V to 3.6 V (single supply) |