MPXA6115A6T1 vs MPX5100A Comparison
Detailed side-by-side comparison of MPXA6115A6T1 by STMicroelectronics and MPX5100A by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
MPXA6115A6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXA6115A6T1 ✓ Active
Specification Comparison
| Parameter | MPXA6115A6T1 | MPX5100A |
|---|---|---|
| Brand | STMicroelectronics | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $12.05 | $9.95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Output Type | Analog Voltage | Analog, ratiometric |
| Output Voltage | 0.2 V to 4.7 V (at 5 V supply) | — |
| Supply Voltage | 4.75 V to 5.25 V | 5.0 V (typical) |
| Accuracy | ±1.5% FS | ±2.5% (over compensated temperature range) |
| Port Style | Single horizontal port (axial) | — |
| Package | 8-SMD Gull Wing (SOP 8-surface-mount module) | 6-SIP Module |
| Mounting Type | Surface Mount | Through-Hole |
| Termination Style | PCB / Gull Wing | — |
| Operating Temperature | -40 °C to +125 °C | 0 C to +85 C (compensated) |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, calibrated | — |
| RoHS Status | Compliant (per distributor listings) | Compliant |
| MSL Level | [DATA_NEEDED: MSL level] | — |
| Output Function | Ratiometric to supply voltage | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Range | — | 0.2 V to 4.7 V |
| Sensitivity | — | 45 mV/kPa |
| Full-Scale Span (typical) | — | 4.5 V |
| Supply Current | — | 10 mA (typical) |
| Storage Temperature | — | [DATA_NEEDED: storage temperature] |
| Port Configuration | — | Single port (absolute) |
| Response Time | — | [DATA_NEEDED: response time] |