MPXA6115A6T1 vs MPX5100A Vergleich
Detaillierter Direktvergleich von MPXA6115A6T1 von STMicroelectronics und MPX5100A von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPXA6115A6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXA6115A6T1 ✓ Aktiv
Spezifikationsvergleich
| Parameter | MPXA6115A6T1 | MPX5100A |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $12,05 | $9,95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Ausgangstyp | Analog Voltage | Analog, ratiometric |
| Ausgangsspannung | 0.2 V to 4.7 V (at 5 V supply) | — |
| Versorgungsspannung | 4.75 V to 5.25 V | 5.0 V (typical) |
| Accuracy | ±1.5% FS | ±2.5% (over compensated temperature range) |
| Port Style | Single horizontal port (axial) | — |
| Gehäuse | 8-SMD Gull Wing (SOP 8-surface-mount module) | 6-SIP Module |
| Montageart | Surface Mount | Through-Hole |
| Termination Style | PCB / Gull Wing | — |
| Betriebstemperatur | -40 °C to +125 °C | 0 C to +85 C (compensated) |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, calibrated | — |
| RoHS-Status | Compliant (per distributor listings) | Compliant |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| Output Function | Ratiometric to supply voltage | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Ausgangsspannungsbereich | — | 0.2 V to 4.7 V |
| Sensitivity | — | 45 mV/kPa |
| Full-Scale Span (typical) | — | 4.5 V |
| Versorgungsstrom | — | 10 mA (typical) |
| Storage Temperature | — | [DATA_NEEDED: storage temperature] |
| Port Configuration | — | Single port (absolute) |
| Response Time | — | [DATA_NEEDED: response time] |