MPXAZ6115A6U vs MPXAZ6115A7U Comparison
Detailed side-by-side comparison of MPXAZ6115A6U by NXP Semiconductors and MPXAZ6115A7U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | MPXAZ6115A6U | MPXAZ6115A7U |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Obsolete | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $9.85 | $10.10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Overpressure | 400 kPa (58.02 PSI) | — |
| Output Type | Analog Voltage | Analog Voltage |
| Output Voltage Range | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Supply Voltage | 5 V typical (ratiometric output) | 5.0 V typical |
| Accuracy | ±1.5% | ±1.5% (0C to 85C, after NXP factory calibration) |
| Operating Temperature Range | -40C to +125C | — |
| Port Style | No Port (axial side-mount package) | Top axial tube, 0.13" (3.17 mm) diameter |
| Media Resistance | Yes (gel-protected, Z-suffix) | — |
| Package | 8-SMD Module, axial port | — |
| Mounting Type | Surface Mount | Through-Hole |
| Signal Conditioning | On-chip, temperature compensated, calibrated | On-chip bipolar op-amp + thin-film resistor network |
| Sensor Technology | Piezoresistive MEMS | — |
| RoHS Status | Compliant | Compliant |
| Reach Status | Compliant | — |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| Sensitivity | — | [DATA_NEEDED: typical sensitivity mV/kPa] |
| Operating Temperature | — | -40C to +125C |
| Package / Case | — | 8-DIP Module (0.560 inch, 14.22 mm) |
| Media Compatibility | — | Non-corrosive dry gases (media resistant) |
| Temperature Compensation | — | On-chip, factory calibrated |