MPXAZ6115A6U vs MPXAZ6115A7U Vergleich
Detaillierter Direktvergleich von MPXAZ6115A6U von NXP Semiconductors und MPXAZ6115A7U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXAZ6115A6U | MPXAZ6115A7U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,85 | $10,10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Overpressure | 400 kPa (58.02 PSI) | — |
| Ausgangstyp | Analog Voltage | Analog Voltage |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Versorgungsspannung | 5 V typical (ratiometric output) | 5.0 V typical |
| Accuracy | ±1.5% | ±1.5% (0C to 85C, after NXP factory calibration) |
| Betriebstemperaturbereich | -40C to +125C | — |
| Port Style | No Port (axial side-mount package) | Top axial tube, 0.13" (3.17 mm) diameter |
| Media Resistance | Yes (gel-protected, Z-suffix) | — |
| Gehäuse | 8-SMD Module, axial port | — |
| Montageart | Surface Mount | Through-Hole |
| Signal Conditioning | On-chip, temperature compensated, calibrated | On-chip bipolar op-amp + thin-film resistor network |
| Sensor Technology | Piezoresistive MEMS | — |
| RoHS-Status | Compliant | Compliant |
| Reach Status | Compliant | — |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| Sensitivity | — | [DATA_NEEDED: typical sensitivity mV/kPa] |
| Betriebstemperatur | — | -40C to +125C |
| Gehäuse / Bauform | — | 8-DIP Module (0.560 inch, 14.22 mm) |
| Media Compatibility | — | Non-corrosive dry gases (media resistant) |
| Temperature Compensation | — | On-chip, factory calibrated |