MPXH6115AC6T1 vs MP3H6115A6U Comparison
Detailed side-by-side comparison of MPXH6115AC6T1 by STMicroelectronics and MP3H6115A6U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ ActiveSpecification Comparison
| Parameter | MPXH6115AC6T1 | MP3H6115A6U |
|---|---|---|
| Brand | STMicroelectronics | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $5.85 | $4.85 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Voltage Span | 0.2 V to 4.7 V (at VCC = 5.0 V) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Supply Current | [DATA_NEEDED: typical supply current] | — |
| Accuracy | 1.5% (over compensated temperature range) | High accuracy at high temperature (per datasheet) |
| Temperature Compensation Range | -40 C to +125 C | — |
| Output Type | Analog, ratiometric | Analog, ratiometric |
| Package / Case | 8-SSOP (0.335", 8.50 mm width), Top Port | — |
| Pressure Port | Male 0.13" (3.3 mm) tube, top-side | Male - 0.13 inch (3.3 mm) tube |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C |
| Media Compatibility | Dry gases (non-corrosive) | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | [DATA_NEEDED: MSL level] | — |
| Sensor Type | — | Absolute pressure sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Supply Voltage | — | 3 V |
| Output Voltage Range | — | 0.12 V to 2.8 V |
| Operating Pressure | — | 15 kPa ~ 115 kPa |
| Temperature Compensation | — | -40 C to +125 C |
| Technology | — | Piezoresistive (MEMS) with bipolar signal conditioning |
| Package | — | 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width |
| Signal Conditioning | — | On-chip bipolar op-amp and thin-film resistor network |
| Output Ratiometric | — | Yes (output proportional to VDD) |
| Package Material | — | Durable thermoplastic (PPS) surface-mount package |