MPXH6115AC6T1 vs MP3H6115A6U 비교
다음의 상세 나란히 비교: MPXH6115AC6T1 제조: STMicroelectronics 및 MP3H6115A6U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
STMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ 활성사양 비교
| 파라미터 | MPXH6115AC6T1 | MP3H6115A6U |
|---|---|---|
| 브랜드 | STMicroelectronics | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.85 | $4.85 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Voltage Span | 0.2 V to 4.7 V (at VCC = 5.0 V) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| 공급 전류 | [DATA_NEEDED: typical supply current] | — |
| Accuracy | 1.5% (over compensated temperature range) | High accuracy at high temperature (per datasheet) |
| Temperature Compensation Range | -40 C to +125 C | — |
| 출력 유형 | Analog, ratiometric | Analog, ratiometric |
| 패키지 / 케이스 | 8-SSOP (0.335", 8.50 mm width), Top Port | — |
| Pressure Port | Male 0.13" (3.3 mm) tube, top-side | Male - 0.13 inch (3.3 mm) tube |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 | -40 C to +125 C | -40 C to +125 C |
| Media Compatibility | Dry gases (non-corrosive) | — |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | [DATA_NEEDED: MSL level] | — |
| 센서 유형 | — | Absolute pressure sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| 공급 전압 | — | 3 V |
| 출력 전압 범위 | — | 0.12 V to 2.8 V |
| Operating Pressure | — | 15 kPa ~ 115 kPa |
| Temperature Compensation | — | -40 C to +125 C |
| Technology | — | Piezoresistive (MEMS) with bipolar signal conditioning |
| 패키지 | — | 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width |
| Signal Conditioning | — | On-chip bipolar op-amp and thin-film resistor network |
| Output Ratiometric | — | Yes (output proportional to VDD) |
| Package Material | — | Durable thermoplastic (PPS) surface-mount package |