MSP430A002IPM vs MSP430F5329IPN Comparison
Detailed side-by-side comparison of MSP430A002IPM by Texas Instruments and MSP430F5329IPN by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments
MSP430A002IPM ✓ ActiveTexas Instruments
MSP430F5329IPN - 25MHz MCU 128KB Flash 80-LQFP | TI MSP430
MSP430F5329IPN ✓ ActiveSpecification Comparison
| Parameter | MSP430A002IPM | MSP430F5329IPN |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Product Type | 16-bit mixed-signal microcontroller | — |
| Core Architecture | MSP430 RISC | — |
| Clock Speed | 8 MHz | — |
| Flash Program Memory | 32 KB (32K × 8 + 256 bytes) | — |
| RAM | 1 KB | — |
| Supply Voltage Range | 1.8 V to 3.6 V | — |
| ADC Resolution | 12-bit | — |
| USART Interfaces | 2 | — |
| I/O Ports | 48 | — |
| Package | 64-LQFP (10 mm × 10 mm) | 80-pin LQFP (PN), 12 x 12 mm |
| Terminal Count | 64 | — |
| Mounting Type | Surface mount | Surface Mount |
| Temperature Grade | Industrial | — |
| Interface Functions | Asynchronous UART or synchronous SPI | — |
| Series | MSP430x1xx | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Pricing | [DATA_NEEDED: distributor unit pricing] | — |
| Core | — | MSP430 CPUXV2 (16-bit RISC) |
| Maximum Clock Frequency | — | 25 MHz |
| Program Memory (Flash) | — | 128 KB (128K x 8) |
| SRAM | — | 10 KB |
| Supply Voltage (DVCC) | — | 2.4 V to 3.6 V |
| Operating Temperature | — | -40C to +85C (Industrial) |
| ADC | — | 12-bit SAR, up to 200 ksps |
| Analog Comparator | — | Yes (on-chip) |
| Hardware Multiplier | — | 16 x 16 -> 32-bit, single cycle |
| DMA Channels | — | Yes (multi-channel) |
| Serial Interfaces | — | UART, SPI, I2C (USCI modules, x2) |
| Timers | — | 4 x 16-bit |
| RTC | — | Yes, with alarm capabilities |
| GPIO Pins | — | 63 (per TI product page) |
| Active Mode Current | — | 180 uA/MHz at 3 V (typical) |
| Low-Power Modes | — | LPM0-LPM4, LPMx.5 (RAM retention off) |
| Programming Interface | — | JTAG, Spy-Bi-Wire (SBW) |