MSP430A002IPM vs MSP430F5329IPN Comparación
Comparación detallada lado a lado de MSP430A002IPM por Texas Instruments y MSP430F5329IPN por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments
MSP430A002IPM ✓ ActivoTexas Instruments
MSP430F5329IPN - 25MHz MCU 128KB Flash 80-LQFP | TI MSP430
MSP430F5329IPN ✓ ActivoComparación de especificaciones
| Parámetro | MSP430A002IPM | MSP430F5329IPN |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Microcontrollers | Microcontrollers |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | 16-bit mixed-signal microcontroller | — |
| Core Architecture | MSP430 RISC | — |
| Clock Speed | 8 MHz | — |
| Flash Program Memory | 32 KB (32K × 8 + 256 bytes) | — |
| RAM | 1 KB | — |
| Supply Voltage Range | 1.8 V to 3.6 V | — |
| ADC Resolution | 12-bit | — |
| USART Interfaces | 2 | — |
| I/O Ports | 48 | — |
| Encapsulado | 64-LQFP (10 mm × 10 mm) | 80-pin LQFP (PN), 12 x 12 mm |
| Terminal Count | 64 | — |
| Tipo de montaje | Surface mount | Surface Mount |
| Temperature Grade | Industrial | — |
| Interface Functions | Asynchronous UART or synchronous SPI | — |
| Series | MSP430x1xx | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Pricing | [DATA_NEEDED: distributor unit pricing] | — |
| Core | — | MSP430 CPUXV2 (16-bit RISC) |
| Frecuencia de reloj máxima | — | 25 MHz |
| Program Memory (Flash) | — | 128 KB (128K x 8) |
| SRAM | — | 10 KB |
| Supply Voltage (DVCC) | — | 2.4 V to 3.6 V |
| Temperatura de funcionamiento | — | -40C to +85C (Industrial) |
| ADC | — | 12-bit SAR, up to 200 ksps |
| Analog Comparator | — | Yes (on-chip) |
| Hardware Multiplier | — | 16 x 16 -> 32-bit, single cycle |
| DMA Channels | — | Yes (multi-channel) |
| Serial Interfaces | — | UART, SPI, I2C (USCI modules, x2) |
| Timers | — | 4 x 16-bit |
| RTC | — | Yes, with alarm capabilities |
| GPIO Pins | — | 63 (per TI product page) |
| Active Mode Current | — | 180 uA/MHz at 3 V (typical) |
| Low-Power Modes | — | LPM0-LPM4, LPMx.5 (RAM retention off) |
| Programming Interface | — | JTAG, Spy-Bi-Wire (SBW) |