NE5532AD8 vs NE5532AD8R2 Comparison
Detailed side-by-side comparison of NE5532AD8 by onsemi and NE5532AD8R2 by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | NE5532AD8 | NE5532AD8R2 |
|---|---|---|
| Brand | onsemi | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Channels | 2 (Dual) | — |
| Amplifier Type | Operational Amplifier | — |
| Supply Voltage (Single) | 6 V to 40 V | — |
| Supply Voltage (Dual) | ±3 V to ±20 V | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | [DATA_NEEDED: slew rate] |
| Total Harmonic Distortion (THD) | 0.002 % at 1 kHz, 600 Ω load | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical | — |
| Output Current | [DATA_NEEDED: rated output drive current] | — |
| Channel Separation | 110 dB at 1 kHz typical | — |
| Operating Temperature Range | 0 °C to +70 °C | [DATA_NEEDED: operating temperature range] |
| Package | 8-pin SOIC (D8, SO-8), 3.90 mm body width | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface mount |
| MSL (Moisture Sensitivity Level) | MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Compensation | Internally compensated (no external cap required) | — |
| Input Protection | Diodes on both inputs | — |
| Output Protection | Short-circuit protection | — |
| Product Type | — | Internally compensated dual low-noise operational amplifier |
| Number of Amplifier Channels | — | 2 channels |
| Gain-Bandwidth Product | — | 10 MHz |
| Supply Voltage Range | — | ±3 V to ±20 V |
| Supply Current | — | 38 mA per channel |
| Input Bias Current | — | 200 nA |
| Input Offset Current | — | 1 µA maximum |
| Common-Mode Rejection Ratio | — | 70 dB |
| Compensation Type | — | Internally compensated |
| Package Width | — | 3.90 mm |
| Lead Pitch | — | 0.154 mm as represented in the supplied listing |
| Shipping Configuration | — | Tape and reel ordering code |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |