NE5532AD8 vs NE5532AD8R2 Vergleich

Detaillierter Direktvergleich von NE5532AD8 von onsemi und NE5532AD8R2 von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter NE5532AD8 NE5532AD8R2
Marke onsemi onsemi
Kategorie Amplifier ICs Amplifier ICs
Lebenszyklusstatus Aktiv Aktiv
Number of Channels 2 (Dual) —
Amplifier Type Operational Amplifier —
Supply Voltage (Single) 6 V to 40 V —
Supply Voltage (Dual) ±3 V to ±20 V —
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz [DATA_NEEDED: full noise density figure from datasheet] —
Unity-Gain Bandwidth 10 MHz typical —
Slew Rate 9 V/µs typical [DATA_NEEDED: slew rate]
Total Harmonic Distortion (THD) 0.002 % at 1 kHz, 600 Ω load —
Input Offset Voltage [DATA_NEEDED: input offset voltage (NE5532A grade)] 0.5 mV typical —
Output Current [DATA_NEEDED: rated output drive current] —
Channel Separation 110 dB at 1 kHz typical —
Betriebstemperaturbereich 0 °C to +70 °C [DATA_NEEDED: operating temperature range]
Gehäuse 8-pin SOIC (D8, SO-8), 3.90 mm body width 8-pin SOIC
Montageart Surface Mount Surface mount
MSL (Moisture Sensitivity Level) MSL-1 / 1 (unlimited floor life per JEDEC J-STD-020) —
RoHS-Status Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
Compensation Internally compensated (no external cap required) —
Input Protection Diodes on both inputs —
Output Protection Short-circuit protection —
Product Type — Internally compensated dual low-noise operational amplifier
Number of Amplifier Channels — 2 channels
Gain-Bandwidth Product — 10 MHz
Supply Voltage Range — ±3 V to ±20 V
Versorgungsstrom — 38 mA per channel
Input Bias Current — 200 nA
Input Offset Current — 1 µA maximum
Common-Mode Rejection Ratio — 70 dB
Compensation Type — Internally compensated
Package Width — 3.90 mm
Lead Pitch — 0.154 mm as represented in the supplied listing
Shipping Configuration — Tape and reel ordering code
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern