NE5532ADR vs NE5534DR Comparison
Detailed side-by-side comparison of NE5532ADR by Texas Instruments and NE5534DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ ActiveTexas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActiveSpecification Comparison
| Parameter | NE5532ADR | NE5534DR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual low-noise operational amplifier | Single low-noise operational amplifier |
| Number of Amplifiers | 2 circuits | — |
| Maximum Supply Voltage | 30 V | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | 13 V/us typical |
| Operating Temperature Range | 0°C to +70°C for NE5532x | [DATA_NEEDED: operating temperature range] |
| Extended-Temperature Variant | -40°C to +85°C for SA5532x | — |
| Package | 8-pin SOIC | 8-SOIC |
| Mounting Type | Surface mount | Surface Mount |
| Output Type | Rail-to-rail output | — |
| Input Voltage | [DATA_NEEDED: input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Current Noise Density | [DATA_NEEDED: current noise density] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |