NE5532ADR vs NE5534DR Comparación
Comparación detallada lado a lado de NE5532ADR por Texas Instruments y NE5534DR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5532ADR - 30V, 10MHz Dual Low-Noise Op Amp | Texas Instruments
NE5532ADR ✓ ActivoTexas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActivoComparación de especificaciones
| Parámetro | NE5532ADR | NE5534DR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Dual low-noise operational amplifier | Single low-noise operational amplifier |
| Number of Amplifiers | 2 circuits | — |
| Maximum Supply Voltage | 30 V | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | 13 V/us typical |
| Rango de temperatura de funcionamiento | 0°C to +70°C for NE5532x | [DATA_NEEDED: operating temperature range] |
| Extended-Temperature Variant | -40°C to +85°C for SA5532x | — |
| Encapsulado | 8-pin SOIC | 8-SOIC |
| Tipo de montaje | Surface mount | Surface Mount |
| Tipo de salida | Rail-to-rail output | — |
| Input Voltage | [DATA_NEEDED: input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Current Noise Density | [DATA_NEEDED: current noise density] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |