NE5532APSRE4 vs AD823ARZ Comparison
Detailed side-by-side comparison of NE5532APSRE4 by Texas Instruments and AD823ARZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532APSRE4 - Dual 10MHz Low-Noise Op Amp | Texas Instruments
NE5532APSRE4 ✓ ActiveSpecification Comparison
| Parameter | NE5532APSRE4 | AD823ARZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Number of Amplifier Circuits | 2 circuits | — |
| Amplifier Type | General-purpose dual operational amplifier | J-FET |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| High DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 9 V/µs typical | 25 V/µs |
| Input Bias Current | 1 µA | — |
| Supply Voltage | 15 V | — |
| Minimum Total Supply Voltage | ±5 V | — |
| Maximum Total Supply Voltage | ±15 V | — |
| Typical Total Supply Voltage | ±9 V or ±12 V | — |
| Operating Temperature Range | 0°C to 70°C | — |
| Package | 8-SOIC, 5.30 mm width | — |
| Number of Pins | 8 pins | — |
| Mounting Type | Surface mount | Surface Mount |
| Packaging | Tape and reel | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Circuits | — | 2 |
| Output Type | — | Rail-to-Rail |
| Gain Bandwidth Product | — | 16 MHz |
| Current - Input Bias | — | 10 pA |
| Voltage - Input Offset | — | 0.5 mV |
| Current - Supply | — | 2.6 mA (x2 channels) |
| Current - Output / Channel | — | 15 mA |
| Voltage - Supply, Single/Dual (±) | — | 3 V ~ 36 V, ±1.5 V ~ ±18 V |
| Operating Temperature | — | -40°C ~ +85°C |
| Package / Case | — | 8-SOIC |
| Capacitive Load Drive | — | 500 pF, G = +1 |