NE5534ADR2 vs NE5534NG Comparison
Detailed side-by-side comparison of NE5534ADR2 by onsemi and NE5534NG by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | NE5534ADR2 | NE5534NG |
|---|---|---|
| Brand | onsemi | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Unknown |
| Amplifier Type | General Purpose | Single operational amplifier |
| Number of Circuits | 1 circuit | — |
| Topology | Single operational amplifier | — |
| Input Voltage Noise Density | 3.5 nV/√Hz typical | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | [DATA_NEEDED: unity-gain bandwidth] |
| Slew Rate | 13 V/µs typical | [DATA_NEEDED: slew rate] |
| High DC Voltage Gain | 100 V/mV typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC+ +18 V and 600 W | — |
| Package | 8-SOIC, 0.154 inch width, 3.90 mm width | — |
| Packaging | Tape and reel | — |
| Mounting Type | Surface mount | Through-hole |
| Product Description | Single high-performance low-noise operational amplifier | — |
| Manufacturer | onsemi | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 20 V |
| Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Number of Circuits per Package | — | 1 circuit |
| Package Type | — | 8-PDIP |
| Product Category | — | Instrumentation, op amp, buffer amplifier |
| Operating Grade | — | Commercial temperature grade |
| Input Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Input Noise Current Density | — | [DATA_NEEDED: input noise current density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current per amplifier] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | not_applicable |