NE5534ADR2 vs NE5534NG 对比
详细并排对比 NE5534ADR2 出自 onsemi 和 NE5534NG 出自 onsemi。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
规格对比
| 参数 | NE5534ADR2 | NE5534NG |
|---|---|---|
| 品牌 | onsemi | onsemi |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | Unknown |
| Amplifier Type | General Purpose | Single operational amplifier |
| Number of Circuits | 1 circuit | — |
| 拓扑 | Single operational amplifier | — |
| Input Voltage Noise Density | 3.5 nV/√Hz typical | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | [DATA_NEEDED: unity-gain bandwidth] |
| Slew Rate | 13 V/µs typical | [DATA_NEEDED: slew rate] |
| High DC Voltage Gain | 100 V/mV typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC+ +18 V and 600 W | — |
| 封装 | 8-SOIC, 0.154 inch width, 3.90 mm width | — |
| Packaging | Tape and reel | — |
| 安装类型 | Surface mount | Through-hole |
| Product Description | Single high-performance low-noise operational amplifier | — |
| Manufacturer | onsemi | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 3 V to 20 V |
| Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Number of Circuits per Package | — | 1 circuit |
| Package Type | — | 8-PDIP |
| Product Category | — | Instrumentation, op amp, buffer amplifier |
| Operating Grade | — | Commercial temperature grade |
| Input Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Input Noise Current Density | — | [DATA_NEEDED: input noise current density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current per amplifier] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | not_applicable |