NE5534AN vs NE5534ADR2 Comparison
Detailed side-by-side comparison of NE5534AN by onsemi and NE5534ADR2 by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | NE5534AN | NE5534ADR2 |
|---|---|---|
| Brand | onsemi | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | End of Life | Active |
| Amplifier Type | General Purpose, Low Noise | General Purpose |
| Number of Circuits | 1 | 1 circuit |
| Gain Bandwidth Product | 10 MHz | — |
| Slew Rate | 13 V/us | 13 V/µs typical |
| Supply Voltage Range | 3 V to 20 V (per rail) | [DATA_NEEDED: supply voltage range] |
| Input Noise | Low noise (A-grade selected for guaranteed low noise) | — |
| Output Drive Capability | High (improved vs TL08x class) | — |
| Compensation | Internal, with external compensation pins | — |
| Package | 8-DIP (0.300 in, 7.62 mm) | 8-SOIC, 0.154 inch width, 3.90 mm width |
| Mounting Type | Through Hole | Surface mount |
| Packaging | Tube | Tape and reel |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| Quiescent Current per Amplifier | [DATA_NEEDED: quiescent current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Manufacturer Lineage | Signetics / Philips / NXP / onsemi | — |
| Topology | — | Single operational amplifier |
| Input Voltage Noise Density | — | 3.5 nV/√Hz typical |
| Gain-Bandwidth Product | — | 10 MHz typical |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at VCC+ +18 V and 600 W |
| Product Description | — | Single high-performance low-noise operational amplifier |
| Manufacturer | — | onsemi |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |