NE5534AN vs NE5534ADR2 तुलना
विस्तृत दोनों ओर की तुलना NE5534AN द्वारा onsemi और NE5534ADR2 द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | NE5534AN | NE5534ADR2 |
|---|---|---|
| ब्रांड | onsemi | onsemi |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | उत्पादन बंद | सक्रिय |
| Amplifier Type | General Purpose, Low Noise | General Purpose |
| Number of Circuits | 1 | 1 circuit |
| Gain Bandwidth Product | 10 MHz | — |
| Slew Rate | 13 V/us | 13 V/µs typical |
| Supply Voltage Range | 3 V to 20 V (per rail) | [DATA_NEEDED: supply voltage range] |
| Input Noise | Low noise (A-grade selected for guaranteed low noise) | — |
| Output Drive Capability | High (improved vs TL08x class) | — |
| Compensation | Internal, with external compensation pins | — |
| पैकेज | 8-DIP (0.300 in, 7.62 mm) | 8-SOIC, 0.154 inch width, 3.90 mm width |
| माउंटिंग प्रकार | Through Hole | Surface mount |
| Packaging | Tube | Tape and reel |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | — |
| Quiescent Current per Amplifier | [DATA_NEEDED: quiescent current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Manufacturer Lineage | Signetics / Philips / NXP / onsemi | — |
| टोपोलॉजी | — | Single operational amplifier |
| Input Voltage Noise Density | — | 3.5 nV/√Hz typical |
| Gain-Bandwidth Product | — | 10 MHz typical |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at VCC+ +18 V and 600 W |
| Product Description | — | Single high-performance low-noise operational amplifier |
| Manufacturer | — | onsemi |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |