OPA130PA vs OPA137PA Comparison
Detailed side-by-side comparison of OPA130PA by Texas Instruments and OPA137PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | OPA130PA | OPA137PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Single operational amplifier | Single J-FET-input operational amplifier |
| Input Topology | FET input | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Bias Current | 20 pA maximum | ±10 pA |
| Quiescent Current | 530 uA typical per amplifier | 120 µA per channel |
| Input Offset Voltage | 1 mV maximum | — |
| Open-Loop Gain | 120 dB minimum | 145 dB |
| Common-Mode Rejection Ratio | 90 dB minimum | — |
| Supply Voltage Range | 4.5 V to 36 V | — |
| Total Supply Voltage Range | 4.5 V to 36 V | — |
| Dual-Supply Operating Range | +/-18 V | — |
| Package | 8-pin PDIP, 0.300 inch body width | 8-pin PDIP |
| Mounting Type | Through-hole | — |
| Number of Pins | 8 | — |
| Low Offset Voltage | 1 mV maximum | — |
| High Open-Loop Gain | 120 dB minimum | — |
| Excellent Bandwidth | 1 MHz | — |
| RoHS Status | Compliant | Compliant |
| AEC-Q100 Qualification | Not applicable | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | 3.5 V/µs |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Number of Amplifier Channels | — | 1 channel |
| Maximum Supply Voltage | — | 36 V |
| Nominal Total Supply Voltage | — | ±18 V |
| Maximum Input Offset Voltage | — | 15 mV |
| Input Common-Mode Range | — | Rail-to-rail input to V+ |
| Package Type | — | Through-hole PDIP |
| Product Family | — | MicroAmplifier |
| Supply Current | — | [DATA_NEEDED: maximum supply current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Current | — | [DATA_NEEDED: short-circuit current] |
| MSL Level | — | [DATA_NEEDED: moisture sensitivity level] |