OPA130PA vs OPA137PA 比較
詳細並排比較 OPA130PA 由 Texas Instruments 與 OPA137PA 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | OPA130PA | OPA137PA |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | Single operational amplifier | Single J-FET-input operational amplifier |
| Input Topology | FET input | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Bias Current | 20 pA maximum | ±10 pA |
| 靜態電流 | 530 uA typical per amplifier | 120 µA per channel |
| Input Offset Voltage | 1 mV maximum | — |
| Open-Loop Gain | 120 dB minimum | 145 dB |
| Common-Mode Rejection Ratio | 90 dB minimum | — |
| Supply Voltage Range | 4.5 V to 36 V | — |
| Total Supply Voltage Range | 4.5 V to 36 V | — |
| Dual-Supply Operating Range | +/-18 V | — |
| 封裝 | 8-pin PDIP, 0.300 inch body width | 8-pin PDIP |
| 安裝類型 | Through-hole | — |
| 腳位數 | 8 | — |
| Low Offset Voltage | 1 mV maximum | — |
| High Open-Loop Gain | 120 dB minimum | — |
| Excellent Bandwidth | 1 MHz | — |
| RoHS 狀態 | Compliant | Compliant |
| AEC-Q100 Qualification | Not applicable | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | 3.5 V/µs |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Number of Amplifier Channels | — | 1 channel |
| Maximum Supply Voltage | — | 36 V |
| Nominal Total Supply Voltage | — | ±18 V |
| Maximum Input Offset Voltage | — | 15 mV |
| Input Common-Mode Range | — | Rail-to-rail input to V+ |
| Package Type | — | Through-hole PDIP |
| Product Family | — | MicroAmplifier |
| 供應電流 | — | [DATA_NEEDED: maximum supply current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Current | — | [DATA_NEEDED: short-circuit current] |
| MSL 等級 | — | [DATA_NEEDED: moisture sensitivity level] |