PN7161B1HN vs PN7160A1HN Comparison
Detailed side-by-side comparison of PN7161B1HN by NXP Semiconductors and PN7160A1HN by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | PN7161B1HN | PN7160A1HN |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | RF Transceivers | RF Modules |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $5.20 | $2.15 |
| Manufacturer | NXP Semiconductors | — |
| Part Number | PN7161B1HN | — |
| Function | NFC Controller (RFID Reader/Transponder IC) | — |
| Operating Frequency | 13.56 MHz | 13.56 MHz |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMV L1 | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | SPI (NCI - NFC Controller Interface) | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Digital Supply Voltage (VDD) | 1.65 V to 1.95 V (typical 1.8 V) | — |
| RF/Analog Supply Voltage (VBAT) | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Apple ECP Support | Yes | — |
| EMV Compliance | EMV L1 Compliant | — |
| Package | 40-VFQFN Exposed Pad | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Mounting Type | Surface Mount | Surface Mount |
| Moisture Sensitivity Level (MSL) | 3 | — |
| Peak Reflow Temperature | 260 C | 260 C (per JEDEC J-STD-020) |
| RoHS Status | Compliant | Compliant |
| Product Type | — | NFC Plug and Play Controller |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Moisture Sensitivity Level | — | MSL 3 |
| Operating Temperature | — | -30 C to +85 C |