SN65HVD232DR vs SN65HVD230DR Comparison
Detailed side-by-side comparison of SN65HVD232DR by Texas Instruments and SN65HVD230DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD232DR ✓ ActiveTexas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveSpecification Comparison
| Parameter | SN65HVD232DR | SN65HVD230DR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.00 | $0.94 |
| Product Type | Single-channel CAN transceiver | CAN Bus Transceiver |
| Supply Voltage | 3.3 V | 3 V to 3.6 V (3.3 V nominal) |
| CAN Data Rate | Up to 1 Mbps | — |
| CAN Standard Compatibility | ISO 11898-2 high-speed CAN physical layer | — |
| Bus Nodes | Up to 120 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Package | 8-pin SOIC | 8-SOIC (D) |
| Operating Temperature | -40°C to +85°C | -40C to +85C |
| Supply Voltage Range | [DATA_NEEDED: recommended operating supply-voltage range] | — |
| Logic Input Voltage | [DATA_NEEDED: CAN controller-compatible logic voltage] | — |
| Differential Output Voltage | Comparable between the SN65HVD23x family variants; exact value not stated in verified search data | — |
| Dominant Common-Mode Output | Lower than 5V supplied transceivers by a few hundred millivolts | — |
| Recessive Common-Mode Output Bias | Same as the referenced 5V supplied transceiver family | — |
| Receiver Input Impedance | High; supports up to 120 nodes on a bus | — |
| Driver Output Transition Time | Controlled for improved signal quality | — |
| Unpowered Node Behavior | Does not disturb the CAN bus | — |
| Channel Count | 1 CAN channel | — |
| RoHS Status | [DATA_NEEDED: RoHS status for this specific orderable part] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status for this specific orderable part] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Maximum Data Rate | — | 1 Mbps |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Mounting Type | — | Surface Mount |
| RS Pin Function | — | Slew-rate control via external resistor |