SN65HVD232DR vs SN65HVD230DR Comparaison

Comparaison détaillée côte à côte de SN65HVD232DR par Texas Instruments et SN65HVD230DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
SN65HVD232DR SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

SN65HVD232DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments

SN65HVD232DR ✓ Actif

Comparaison des spécifications

Paramètre SN65HVD232DR SN65HVD230DR
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,00 $0,94
Product Type Single-channel CAN transceiver CAN Bus Transceiver
Tension d'alimentation 3.3 V 3 V to 3.6 V (3.3 V nominal)
CAN Data Rate Up to 1 Mbps —
CAN Standard Compatibility ISO 11898-2 high-speed CAN physical layer —
Bus Nodes Up to 120 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM —
Boîtier 8-pin SOIC 8-SOIC (D)
Température de fonctionnement -40°C to +85°C -40C to +85C
Supply Voltage Range [DATA_NEEDED: recommended operating supply-voltage range] —
Logic Input Voltage [DATA_NEEDED: CAN controller-compatible logic voltage] —
Differential Output Voltage Comparable between the SN65HVD23x family variants; exact value not stated in verified search data —
Dominant Common-Mode Output Lower than 5V supplied transceivers by a few hundred millivolts —
Recessive Common-Mode Output Bias Same as the referenced 5V supplied transceiver family —
Receiver Input Impedance High; supports up to 120 nodes on a bus —
Driver Output Transition Time Controlled for improved signal quality —
Unpowered Node Behavior Does not disturb the CAN bus —
Channel Count 1 CAN channel —
Statut RoHS [DATA_NEEDED: RoHS status for this specific orderable part] Compliant
REACH Status [DATA_NEEDED: REACH status for this specific orderable part] —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Number of Drivers/Receivers — 1/1
Protocol — CANbus (ISO 11898-2)
Maximum Data Rate — 1 Mbps
Driver/Receiver Configuration — Half-Duplex
Standby Mode Supply Current — 370 uA typical
ESD Protection (Bus Pins, HBM) — Exceeds 16 kV
Maximum Nodes on Bus — 120 nodes
Receiver Common-Mode Range — -2 V to 7 V
Type de montage — Surface Mount
RS Pin Function — Slew-rate control via external resistor

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis