SN65HVD71D vs SN65HVD70DGSR Comparison
Detailed side-by-side comparison of SN65HVD71D by Texas Instruments and SN65HVD70DGSR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD71D - 400kbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD71D ✓ ActiveTexas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ ActiveSpecification Comparison
| Parameter | SN65HVD71D | SN65HVD70DGSR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Full-duplex RS-485 and RS-422 transceiver | RS-485 / RS-422 Transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 400 kbps | — |
| Driver Channels | 1 | — |
| Receiver Channels | 1 | — |
| Duplex Mode | Full duplex | — |
| ESD Protection | 12 kV IEC | — |
| Operating Temperature Range | -40 °C to +125 °C | — |
| Package | 8-pin SOIC (D) | 10-pin VSSOP (DGS) with PowerPAD |
| Mounting Type | Surface mount | Surface Mount |
| Enable Inputs | None | — |
| Interface Standard | RS-485 and RS-422 | — |
| Logic Supply | 3.3 V CMOS-compatible | — |
| Quiescent Current | 1.1 mA | — |
| Manufacturer Packaging | 2,500 pieces per reel | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Data Rate | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Receiver Hysteresis | — | 50 mV (typical) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Active-high |
| Receiver Enable | — | Active-low |
| Standby Current | — | < 5 µA (both disabled) |
| Operating Temperature | — | -40 °C to +125 °C |