SN65HVD71D vs SN65HVD70DGSR Comparaison
Comparaison détaillée côte à côte de SN65HVD71D par Texas Instruments et SN65HVD70DGSR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD71D - 400kbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD71D ✓ ActifTexas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD71D | SN65HVD70DGSR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Full-duplex RS-485 and RS-422 transceiver | RS-485 / RS-422 Transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 400 kbps | — |
| Driver Channels | 1 | — |
| Receiver Channels | 1 | — |
| Duplex Mode | Full duplex | — |
| ESD Protection | 12 kV IEC | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 8-pin SOIC (D) | 10-pin VSSOP (DGS) with PowerPAD |
| Type de montage | Surface mount | Surface Mount |
| Enable Inputs | None | — |
| Interface Standard | RS-485 and RS-422 | — |
| Logic Supply | 3.3 V CMOS-compatible | — |
| Courant de repos | 1.1 mA | — |
| Manufacturer Packaging | 2,500 pieces per reel | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Débit de données | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Receiver Hysteresis | — | 50 mV (typical) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Active-high |
| Receiver Enable | — | Active-low |
| Standby Current | — | < 5 µA (both disabled) |
| Température de fonctionnement | — | -40 °C to +125 °C |