SN65HVD74D vs SN65HVD75D Comparison
Detailed side-by-side comparison of SN65HVD74D by Texas Instruments and SN65HVD75D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD74D | SN65HVD75D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Full-duplex RS-485 transceiver | Half-duplex RS-485 transceiver |
| Supply Voltage | 3.3 V | 3.3 V |
| Operating Supply Voltage Range | 3.0 V to 3.6 V | — |
| Maximum Data Rate | 20 Mbps | — |
| Driver and Receiver Configuration | 1/1 transceiver | — |
| Communication Standard | RS-422 and RS-485 | — |
| Duplex Mode | Full duplex | Half-duplex |
| IEC ESD Protection | 12 kV | — |
| IEC61000-4-2 Contact Discharge Protection | Greater than 12 kV | — |
| HBM ESD Protection | Greater than 30 kV | — |
| Receiver Hysteresis | 70 mV | — |
| Operating Temperature Range | -40°C to 125°C | -40°C to 125°C |
| Power Supply Architecture | Single 3.3 V supply | — |
| Driver Inputs and Receiver Outputs | Separate pins for full-duplex communication | — |
| Package | 8-pin SOIC | 8-pin SOIC (D) |
| Mounting Type | Surface mount | Surface mount |
| Shipping Package | Tube | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Maximum Signaling Rate | — | 20 Mbps |
| Logic Input Compatibility | — | 5 V tolerant; compatible with 3.3 V or 5 V controllers |
| ESD Protection | — | IEC ESD protection on bus pins |
| ESD Test Model | — | Human Body Model and IEC Contact Discharge |
| Driver and Receiver Architecture | — | One differential driver and one differential receiver |
| Bus Standards | — | RS-485 and RS-422 compatible transceiver |
| Recommended Supply Bypass | — | 100 nF ceramic capacitor |
| Recommended 3.3 V Regulator | — | TPS76333 |
| Recommended Isolated Supply Reference | — | SN6501 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |