SN65HVD74D vs SN65HVD75D So sánh
So sánh chi tiết song song của SN65HVD74D bằng Texas Instruments và SN65HVD75D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | SN65HVD74D | SN65HVD75D |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Full-duplex RS-485 transceiver | Half-duplex RS-485 transceiver |
| Điện áp cung cấp | 3.3 V | 3.3 V |
| Operating Supply Voltage Range | 3.0 V to 3.6 V | — |
| Maximum Data Rate | 20 Mbps | — |
| Driver and Receiver Configuration | 1/1 transceiver | — |
| Communication Standard | RS-422 and RS-485 | — |
| Duplex Mode | Full duplex | Half-duplex |
| IEC ESD Protection | 12 kV | — |
| IEC61000-4-2 Contact Discharge Protection | Greater than 12 kV | — |
| HBM ESD Protection | Greater than 30 kV | — |
| Receiver Hysteresis | 70 mV | — |
| Khoảng nhiệt độ hoạt động | -40°C to 125°C | -40°C to 125°C |
| Power Supply Architecture | Single 3.3 V supply | — |
| Driver Inputs and Receiver Outputs | Separate pins for full-duplex communication | — |
| Hộp | 8-pin SOIC | 8-pin SOIC (D) |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Shipping Package | Tube | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Maximum Signaling Rate | — | 20 Mbps |
| Logic Input Compatibility | — | 5 V tolerant; compatible with 3.3 V or 5 V controllers |
| ESD Protection | — | IEC ESD protection on bus pins |
| ESD Test Model | — | Human Body Model and IEC Contact Discharge |
| Driver and Receiver Architecture | — | One differential driver and one differential receiver |
| Bus Standards | — | RS-485 and RS-422 compatible transceiver |
| Recommended Supply Bypass | — | 100 nF ceramic capacitor |
| Recommended 3.3 V Regulator | — | TPS76333 |
| Recommended Isolated Supply Reference | — | SN6501 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |