SN75176BD vs ADM485ARZ-REEL Comparison
Detailed side-by-side comparison of SN75176BD by Texas Instruments and ADM485ARZ-REEL by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM485ARZ-REEL - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM485ARZ-REEL ✓ ActiveSpecification Comparison
| Parameter | SN75176BD | ADM485ARZ-REEL |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Differential bus transceiver | — |
| Supply Voltage | 5 V | 5 V (single supply) |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Operating Temperature Range | 0 °C to 70 °C | -40 C to +85 C |
| Package | SOIC (D), 8 pins | SOIC-8 (SO-8) / SO-8 |
| Mounting Type | Surface mount | Surface Mount |
| Pin Count | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Data Rate | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |