SN75176BD vs ADM485ARZ-REEL 비교
다음의 상세 나란히 비교: SN75176BD 제조: Texas Instruments 및 ADM485ARZ-REEL 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADM485ARZ-REEL - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM485ARZ-REEL ✓ 활성사양 비교
| 파라미터 | SN75176BD | ADM485ARZ-REEL |
|---|---|---|
| 브랜드 | Texas Instruments | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Differential bus transceiver | — |
| 공급 전압 | 5 V | 5 V (single supply) |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| 동작 온도 범위 | 0 °C to 70 °C | -40 C to +85 C |
| 패키지 | SOIC (D), 8 pins | SOIC-8 (SO-8) / SO-8 |
| 실장 유형 | Surface mount | Surface Mount |
| 핀 수 | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| 데이터 속도 | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL 레벨 | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |