SN75176BDR vs ST485CDR Comparison
Detailed side-by-side comparison of SN75176BDR by Texas Instruments and ST485CDR by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
ST485CDR - 2.5Mbps Low-Power RS-485/RS-422 Transceiver SOIC-8 | ST
ST485CDR ✓ ActiveSpecification Comparison
| Parameter | SN75176BDR | ST485CDR |
|---|---|---|
| Brand | Texas Instruments | STMicroelectronics |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.11 | $0.71 |
| Product Type | Differential bus transceiver | — |
| Supply Voltage | 5 V | 4.75 V to 5.25 V |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Operating Temperature Range | 0 °C to 70 °C | — |
| Package | SOIC (D), 8 pins | SOIC-8 |
| Mounting Type | Surface mount | Surface Mount |
| Pin Count | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Quiescent Current | [DATA_NEEDED: quiescent current] | — |
| Function | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Data Rate | — | 2.5 Mbps |
| Supply Current (unloaded, drivers disabled) | — | 300 uA typical |
| Common-Mode Range (bus pins) | — | -7 V to +12 V |
| Receiver Input Hysteresis | — | 70 mV typical |
| Operating Temperature | — | 0C to +70C (C grade) |
| Driver Short-Circuit Protection | — | Yes, current-limited |
| Thermal Shutdown | — | Yes |
| ESD Protection (bus pins) | — | [DATA_NEEDED: ESD rating] |