SN75176BDR vs ST485CDR Comparación
Comparación detallada lado a lado de SN75176BDR por Texas Instruments y ST485CDR por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
STMicroelectronics
ST485CDR - 2.5Mbps Low-Power RS-485/RS-422 Transceiver SOIC-8 | ST
ST485CDR ✓ ActivoComparación de especificaciones
| Parámetro | SN75176BDR | ST485CDR |
|---|---|---|
| Marca | Texas Instruments | STMicroelectronics |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,11 | $0,71 |
| Product Type | Differential bus transceiver | — |
| Tensión de alimentación | 5 V | 4.75 V to 5.25 V |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Rango de temperatura de funcionamiento | 0 °C to 70 °C | — |
| Encapsulado | SOIC (D), 8 pins | SOIC-8 |
| Tipo de montaje | Surface mount | Surface Mount |
| Recuento de pines | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Función | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Velocidad de datos | — | 2.5 Mbps |
| Supply Current (unloaded, drivers disabled) | — | 300 uA typical |
| Common-Mode Range (bus pins) | — | -7 V to +12 V |
| Receiver Input Hysteresis | — | 70 mV typical |
| Temperatura de funcionamiento | — | 0C to +70C (C grade) |
| Driver Short-Circuit Protection | — | Yes, current-limited |
| Apagado térmico | — | Yes |
| ESD Protection (bus pins) | — | [DATA_NEEDED: ESD rating] |