STM32F107VCT6 vs STM32F107RCT6 Comparison
Detailed side-by-side comparison of STM32F107VCT6 by STMicroelectronics and STM32F107RCT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ ActiveSTMicroelectronics
STM32F107RCT6 - 256KB Flash Ethernet ARM MCU | STMicroelectronics
STM32F107RCT6 ✓ ActiveSpecification Comparison
| Parameter | STM32F107VCT6 | STM32F107RCT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Core Architecture | ARM Cortex-M3 32-bit RISC | — |
| Maximum Clock Frequency | 72 MHz | — |
| Flash Memory | 256 KB (256K x 8) | 256 KB (4 x 64 KB, read-while-write) |
| SRAM | 64 KB | 64 KB |
| Supply Voltage Range | 2.0 V to 3.6 V | — |
| Operating Temperature Range | -40 C to +85 C | — |
| Package | 100-pin LQFP (14x14 mm) | LQFP-64, 10x10 mm, 0.5 mm pitch |
| Mounting Type | Surface Mount | Surface Mount |
| Ethernet MAC | 10/100 Mbps with dedicated DMA | — |
| USB Interface | USB 2.0 OTG full-speed (on-chip PHY) | — |
| CAN Controllers | 2 x CAN 2.0B | — |
| USART / UART | 5 USARTs | — |
| SPI | 3 SPIs | — |
| I2C | 2 I2Cs | — |
| ADC | 2 x 12-bit, up to 16 channels | 2 x 12-bit, 1 us conversion (3 ADCs per datasheet, 2 cited) |
| Timers | 10 timers (general-purpose + PWM) | 4 x 16-bit GP, 1 x PWM, 2 x watchdog, SysTick |
| Debug Interface | JTAG and SWD | — |
| Low-Power Modes | Sleep, Stop, Standby | Sleep, Stop, Standby |
| RoHS Status | Compliant | Compliant (per distributor listing) |
| MSL Level | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Core | — | ARM Cortex-M3 32-bit RISC |
| Maximum CPU Clock | — | 72 MHz |
| Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Supply Voltage (VDD) | — | 2.0 V to 3.6 V |
| Operating Temperature | — | -40 C to +85 C (grade 6) |
| Ethernet | — | 10/100 MAC MAC (IEEE 802.3), MII/RMII |
| USB | — | USB 2.0 OTG full-speed (host/device) |
| CAN | — | 2 x CAN 2.0B active |
| DAC | — | 2 x 12-bit |
| DMA | — | 12-channel DMA controller |
| Communication | — | USART, UART, SPI, I2C, I2S, USB, CAN, Ethernet |