STM32F107VCT6 vs STM32F107RCT6 Vergleich
Detaillierter Direktvergleich von STM32F107VCT6 von STMicroelectronics und STM32F107RCT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ AktivSTMicroelectronics
STM32F107RCT6 - 256KB Flash Ethernet ARM MCU | STMicroelectronics
STM32F107RCT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F107VCT6 | STM32F107RCT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,95 | $5,55 |
| Core Architecture | ARM Cortex-M3 32-bit RISC | — |
| Maximale Taktfrequenz | 72 MHz | — |
| Flash Memory | 256 KB (256K x 8) | 256 KB (4 x 64 KB, read-while-write) |
| SRAM | 64 KB | 64 KB |
| Supply Voltage Range | 2.0 V to 3.6 V | — |
| Betriebstemperaturbereich | -40 C to +85 C | — |
| Gehäuse | 100-pin LQFP (14x14 mm) | LQFP-64, 10x10 mm, 0.5 mm pitch |
| Montageart | Surface Mount | Surface Mount |
| Ethernet MAC | 10/100 Mbps with dedicated DMA | — |
| USB Interface | USB 2.0 OTG full-speed (on-chip PHY) | — |
| CAN Controllers | 2 x CAN 2.0B | — |
| USART / UART | 5 USARTs | — |
| SPI | 3 SPIs | — |
| I2C | 2 I2Cs | — |
| ADC | 2 x 12-bit, up to 16 channels | 2 x 12-bit, 1 us conversion (3 ADCs per datasheet, 2 cited) |
| Timers | 10 timers (general-purpose + PWM) | 4 x 16-bit GP, 1 x PWM, 2 x watchdog, SysTick |
| Debug Interface | JTAG and SWD | — |
| Low-Power Modes | Sleep, Stop, Standby | Sleep, Stop, Standby |
| RoHS-Status | Compliant | Compliant (per distributor listing) |
| MSL-Level | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Core | — | ARM Cortex-M3 32-bit RISC |
| Maximum CPU Clock | — | 72 MHz |
| Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Supply Voltage (VDD) | — | 2.0 V to 3.6 V |
| Betriebstemperatur | — | -40 C to +85 C (grade 6) |
| Ethernet | — | 10/100 MAC MAC (IEEE 802.3), MII/RMII |
| USB | — | USB 2.0 OTG full-speed (host/device) |
| CAN | — | 2 x CAN 2.0B active |
| DAC | — | 2 x 12-bit |
| DMA | — | 12-channel DMA controller |
| Communication | — | USART, UART, SPI, I2C, I2S, USB, CAN, Ethernet |