STM32F429VGT6 vs STM32F427VGT6 Comparison
Detailed side-by-side comparison of STM32F429VGT6 by STMicroelectronics and STM32F427VGT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ ActiveSTMicroelectronics
STM32F427VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | STMicroelectronics
STM32F427VGT6 ✓ ActiveSpecification Comparison
| Parameter | STM32F429VGT6 | STM32F427VGT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $10.85 | $8.95 |
| Core | ARM Cortex-M4 with FPU and DSP instructions | — |
| CPU Maximum Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 1 MB | — |
| SRAM | 192 KB (including 4 KB backup SRAM) | 256 KB (192 KB + 64 KB CCM) |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Package | LQFP-100 (14 x 14 mm) | 100-pin LQFP (14x14 mm) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 C to +85 C (grade 6) | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | Yes - 0-wait-state Flash execution |
| MPU | Yes (memory protection unit) | — |
| LCD-TFT Controller | Yes, up to XGA resolution | — |
| DMA2D (Chrom-ART) | Yes | — |
| USB OTG | HS + FS (with on-chip PHY) | — |
| Ethernet MAC | 10/100 with IEEE 1588v2 | — |
| CAN Controllers | 2 x CAN 2.0B active | — |
| ADC | 3 x 12-bit, up to 2.4 MSPS | 3 x 12-bit, 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| Timers | 17 (including 12 x 16-bit, 2 x 32-bit) | Up to 17 (including 32-bit) |
| GPIOs | Up to 82 fast GPIOs | — |
| Crypto/Hash Accelerator | AES-128/192/256, SHA-1, MD5, 3DES | — |
| SDMMC | 1 x SDMMC host | — |
| Communication Peripherals | UART, SPI, I2C, SAI, SPDIF-Rx | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | 3 (168 hours) | 3 (JEDEC J-STD-020) |
| Core Architecture | — | ARM 32-bit Cortex-M4 with FPU and DSP |
| Maximum Clock Frequency | — | 180 MHz |
| Performance | — | 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Flash Memory | — | 1 MB (1M x 8) |
| Supply Voltage (VDD/VDDA) | — | 2.0 V to 3.6 V (full performance); 1.8 V min |
| Operating Temperature Range | — | -40C to +85C (grade 6) |
| Communication Interfaces | — | USB OTG FS + HS PHY, 2x CAN 2.0B, Ethernet MAC, 6x USART/UART, 3x SPI, 4x I2C, 2x I2S, SDIO |
| Cryptography | — | AES 128/256, SHA-1/SHA-2, TRNG, hash |
| Display Controller | — | LCD-TFT (F427 line) |
| GPIO | — | Up to 114 (82 in LQFP-100) |