STM32F429VGT6 vs STM32F427VGT6 Vergleich
Detaillierter Direktvergleich von STM32F429VGT6 von STMicroelectronics und STM32F427VGT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ AktivSTMicroelectronics
STM32F427VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | STMicroelectronics
STM32F427VGT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F429VGT6 | STM32F427VGT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,85 | $8,95 |
| Core | ARM Cortex-M4 with FPU and DSP instructions | — |
| CPU Maximum Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 1 MB | — |
| SRAM | 192 KB (including 4 KB backup SRAM) | 256 KB (192 KB + 64 KB CCM) |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Gehäuse | LQFP-100 (14 x 14 mm) | 100-pin LQFP (14x14 mm) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 C to +85 C (grade 6) | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | Yes - 0-wait-state Flash execution |
| MPU | Yes (memory protection unit) | — |
| LCD-TFT Controller | Yes, up to XGA resolution | — |
| DMA2D (Chrom-ART) | Yes | — |
| USB OTG | HS + FS (with on-chip PHY) | — |
| Ethernet MAC | 10/100 with IEEE 1588v2 | — |
| CAN Controllers | 2 x CAN 2.0B active | — |
| ADC | 3 x 12-bit, up to 2.4 MSPS | 3 x 12-bit, 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| Timers | 17 (including 12 x 16-bit, 2 x 32-bit) | Up to 17 (including 32-bit) |
| GPIOs | Up to 82 fast GPIOs | — |
| Crypto/Hash Accelerator | AES-128/192/256, SHA-1, MD5, 3DES | — |
| SDMMC | 1 x SDMMC host | — |
| Communication Peripherals | UART, SPI, I2C, SAI, SPDIF-Rx | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | 3 (168 hours) | 3 (JEDEC J-STD-020) |
| Core Architecture | — | ARM 32-bit Cortex-M4 with FPU and DSP |
| Maximale Taktfrequenz | — | 180 MHz |
| Performance | — | 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Flash Memory | — | 1 MB (1M x 8) |
| Supply Voltage (VDD/VDDA) | — | 2.0 V to 3.6 V (full performance); 1.8 V min |
| Betriebstemperaturbereich | — | -40C to +85C (grade 6) |
| Communication Interfaces | — | USB OTG FS + HS PHY, 2x CAN 2.0B, Ethernet MAC, 6x USART/UART, 3x SPI, 4x I2C, 2x I2S, SDIO |
| Cryptography | — | AES 128/256, SHA-1/SHA-2, TRNG, hash |
| Display Controller | — | LCD-TFT (F427 line) |
| GPIO | — | Up to 114 (82 in LQFP-100) |