TCA4311DRG4 vs TCA4311D Comparison

Detailed side-by-side comparison of TCA4311DRG4 by Texas Instruments and TCA4311D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
TCA4311DRG4 TCA4311DRG4 - 400kHz Hot-Swap I2C Buffer | Texas Instruments

TCA4311DRG4 - 400kHz Hot-Swap I2C Buffer | Texas Instruments

TCA4311DRG4 ✓ Active
Texas Instruments
TCA4311D TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D ✓ Active

Specification Comparison

Parameter TCA4311DRG4 TCA4311D
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type 2-bit bidirectional I2C/SMBus buffer accelerator 2-bit bidirectional I2C/SMBus buffer
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Maximum I2C Bus Frequency 400 kHz —
Number of Buffered Channels 2 bits —
Bus Direction Bidirectional —
Supported Bus I2C and SMBus —
Hot-Swap Support Yes Yes, hot-swappable
Operating Temperature Range -40 C to +85 C [DATA_NEEDED: operating temperature range]
Package 8-pin SOIC, 3.90 mm width 8-pin SOIC, 0.154 inch wide, 3.90 mm
Mounting Type Surface mount Surface mount
Input Capacitance 10 pF —
I2C Maximum Bus Capacitance 400 pF 400 pF
SMBus Maximum Bus Capacitance No specified restriction —
Logic Interface 2-wire bus —
Output Interface 2-wire bus —
Signal Conditioning Bus buffering and acceleration —
Manufacturer Orderable Suffix DRG4 —
Standard Reel Quantity 2500 units —
RoHS Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Maximum Bus Frequency — 400 kHz
Number of Buffered Bits — 2 bits
Signal Direction — Bidirectional
Supported Buses — I2C and SMBus
Enable Control — EN pin; low enables shutdown mode
Connection Status Output — Open-drain READY output
Connected Buses When READY Is High — SDAIN to SDAOUT and SCLIN to SCLOUT
SMBus Capacitance Restriction — None specified by SMBus, subject to rise-time and fall-time limits
Supply Current — [DATA_NEEDED: supply current]
Propagation Delay — [DATA_NEEDED: propagation delay]
Quiescent Current — [DATA_NEEDED: quiescent current]

Datasheets & Resources

Browse All Products Create BOM Request Quote