TCA4311DRG4 vs TCA4311D Comparaison
Comparaison détaillée côte à côte de TCA4311DRG4 par Texas Instruments et TCA4311D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TCA4311DRG4 | TCA4311D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 2-bit bidirectional I2C/SMBus buffer accelerator | 2-bit bidirectional I2C/SMBus buffer |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Maximum I2C Bus Frequency | 400 kHz | — |
| Number of Buffered Channels | 2 bits | — |
| Bus Direction | Bidirectional | — |
| Supported Bus | I2C and SMBus | — |
| Hot-Swap Support | Yes | Yes, hot-swappable |
| Plage de température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin SOIC, 3.90 mm width | 8-pin SOIC, 0.154 inch wide, 3.90 mm |
| Type de montage | Surface mount | Surface mount |
| Capacité d'entrée | 10 pF | — |
| I2C Maximum Bus Capacitance | 400 pF | 400 pF |
| SMBus Maximum Bus Capacitance | No specified restriction | — |
| Logic Interface | 2-wire bus | — |
| Output Interface | 2-wire bus | — |
| Signal Conditioning | Bus buffering and acceleration | — |
| Manufacturer Orderable Suffix | DRG4 | — |
| Standard Reel Quantity | 2500 units | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Bus Frequency | — | 400 kHz |
| Number of Buffered Bits | — | 2 bits |
| Signal Direction | — | Bidirectional |
| Supported Buses | — | I2C and SMBus |
| Enable Control | — | EN pin; low enables shutdown mode |
| Connection Status Output | — | Open-drain READY output |
| Connected Buses When READY Is High | — | SDAIN to SDAOUT and SCLIN to SCLOUT |
| SMBus Capacitance Restriction | — | None specified by SMBus, subject to rise-time and fall-time limits |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |