TLV9301IDBVR vs TS321IDT Comparison
Detailed side-by-side comparison of TLV9301IDBVR by Texas Instruments and TS321IDT by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TLV9301IDBVR - 40V 1MHz RRO Op Amp SOT-23-5 | Texas Instruments
TLV9301IDBVR ✓ ActiveSpecification Comparison
| Parameter | TLV9301IDBVR | TS321IDT |
|---|---|---|
| Brand | Texas Instruments | STMicroelectronics |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Obsolete |
| Number of Channels | 1 (Single) | 1 channel |
| Topology | Standard (General Purpose) Op Amp | — |
| Output Type | Rail-to-Rail Output (RRO) | — |
| Input Type | CMOS (MUX-friendly, rail-to-rail on positive rail) | — |
| Gain Bandwidth Product (GBW) | 1 MHz | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | [DATA_NEEDED: slew rate] |
| Input Offset Voltage (Vos) | ±0.5 mV (typ) | — |
| Input Offset Drift (dVos/dT) | ±2 µV/°C (typ) | — |
| Supply Voltage Range (Single Supply) | 2.7 V to 40 V | — |
| Supply Voltage Range (Split Supply) | ±1.35 V to ±20 V | — |
| Quiescent Current per Channel (Iq) | [DATA_NEEDED: Iq per channel µA/mA] | — |
| Output Current (Short-Circuit) | ±60 mA (typ short-circuit) | — |
| Common-Mode Rejection Ratio (CMRR) | [DATA_NEEDED: CMRR dB] | — |
| Power-Supply Rejection Ratio (PSRR) | [DATA_NEEDED: PSRR dB] | — |
| Operating Temperature Range | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Package | SOT-23-5 (DBV) | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface mount |
| MSL Level | [DATA_NEEDED: MSL level] | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Grade (AEC-Q100) | Standard grade (AEC-Q100 variants exist in family) | — |
| Product Type | — | Single general-purpose operational amplifier |
| Amplifier Architecture | — | Bipolar operational amplifier |
| Gain-Bandwidth Product | — | 800 kHz |
| Maximum Total Supply Voltage | — | 30 V |
| Nominal Supply Configuration | — | Plus or minus 15 V |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Supply Current | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |