TUSB213RGYR vs TUSB215RGYT Comparison
Detailed side-by-side comparison of TUSB213RGYR by Texas Instruments and TUSB215RGYT by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TUSB213RGYR - USB 2.0 HS Redriver with DC Boost | Texas Instruments
TUSB213RGYR ✓ ActiveTexas Instruments
TUSB215RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB215RGYT ✓ ActiveSpecification Comparison
| Parameter | TUSB213RGYR | TUSB215RGYT |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | USB Interface ICs | USB Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | USB 2.0 high-speed redriver with DC boost | — |
| USB Compatibility | USB 2.0, OTG 2.0, and BC 1.2 | — |
| Maximum USB Data Rate | 480 Mbit/s | — |
| High-Speed Channel Count | 1 channel | — |
| Supported Signaling Modes | Low-speed, full-speed, and high-speed | — |
| Supply Voltage Range | 4.4 V to 5.5 V | — |
| AC Boost Settings | 4 selectable settings | — |
| Configuration Interface | Pin strap or I2C | — |
| Maximum Pre-Channel Cable Length | 5 m | — |
| Maximum Post-Channel Cable Length | 2 m | — |
| Data Pair Routing | Interchangeable D1P/M and D2P/M | — |
| Host and Device Operation | Host-agnostic and device-agnostic | — |
| Daisy-Chain Support | Yes | — |
| Low-Speed and Full-Speed Behavior | Automatically bypassed | — |
| Power Management Features | Ultra-low USB disconnect and shutdown | — |
| Package | 14-pin VQFN (RGY), 3.5 mm x 3.5 mm | 14-pin VQFN (RGY), 3.5 x 3.5 mm |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | RoHS3 compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | USB 2.0 high-speed signal conditioner |
| USB Speed | — | 480 Mbit/s high speed |
| Supported USB Modes | — | USB 2.0, OTG 2.0, BC 1.2 |
| Supported Signaling Rates | — | Low-Speed, Full-Speed, High-Speed |
| Number of Channels | — | 1 |
| DC Boost | — | Supported |
| Battery Charging | — | Integrated USB BC1.2 CDP |
| CDP Configuration | — | Pin strap or I²C |
| VBUS Supply | — | Integrated |
| Data Path Interchangeability | — | D1P/M and D2P/M interchangeable |
| Host or Device Operation | — | Host and device agnostic |
| Daisy Chain Support | — | Supported |
| Pre-Channel Cable Length | — | Up to 5 m |
| Post-Channel Cable Length | — | Up to 2 m |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |