TUSB213RGYR vs TUSB215RGYT Comparaison
Comparaison détaillée côte à côte de TUSB213RGYR par Texas Instruments et TUSB215RGYT par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TUSB213RGYR - USB 2.0 HS Redriver with DC Boost | Texas Instruments
TUSB213RGYR ✓ ActifTexas Instruments
TUSB215RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB215RGYT ✓ ActifComparaison des spécifications
| Paramètre | TUSB213RGYR | TUSB215RGYT |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | USB Interface ICs | USB Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | USB 2.0 high-speed redriver with DC boost | — |
| USB Compatibility | USB 2.0, OTG 2.0, and BC 1.2 | — |
| Maximum USB Data Rate | 480 Mbit/s | — |
| High-Speed Channel Count | 1 channel | — |
| Supported Signaling Modes | Low-speed, full-speed, and high-speed | — |
| Supply Voltage Range | 4.4 V to 5.5 V | — |
| AC Boost Settings | 4 selectable settings | — |
| Configuration Interface | Pin strap or I2C | — |
| Maximum Pre-Channel Cable Length | 5 m | — |
| Maximum Post-Channel Cable Length | 2 m | — |
| Data Pair Routing | Interchangeable D1P/M and D2P/M | — |
| Host and Device Operation | Host-agnostic and device-agnostic | — |
| Daisy-Chain Support | Yes | — |
| Low-Speed and Full-Speed Behavior | Automatically bypassed | — |
| Power Management Features | Ultra-low USB disconnect and shutdown | — |
| Boîtier | 14-pin VQFN (RGY), 3.5 mm x 3.5 mm | 14-pin VQFN (RGY), 3.5 x 3.5 mm |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | RoHS3 compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | USB 2.0 high-speed signal conditioner |
| USB Speed | — | 480 Mbit/s high speed |
| Supported USB Modes | — | USB 2.0, OTG 2.0, BC 1.2 |
| Supported Signaling Rates | — | Low-Speed, Full-Speed, High-Speed |
| Number of Channels | — | 1 |
| DC Boost | — | Supported |
| Battery Charging | — | Integrated USB BC1.2 CDP |
| CDP Configuration | — | Pin strap or I²C |
| VBUS Supply | — | Integrated |
| Data Path Interchangeability | — | D1P/M and D2P/M interchangeable |
| Host or Device Operation | — | Host and device agnostic |
| Daisy Chain Support | — | Supported |
| Pre-Channel Cable Length | — | Up to 5 m |
| Post-Channel Cable Length | — | Up to 2 m |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |