TUSB8041RGCT vs TUSB8041ARGCT Comparison
Detailed side-by-side comparison of TUSB8041RGCT by Texas Instruments and TUSB8041ARGCT by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TUSB8041ARGCT - 4-Port USB 3.1 Gen1 Hub Controller | Texas Instruments
TUSB8041ARGCT ✓ ActiveSpecification Comparison
| Parameter | TUSB8041RGCT | TUSB8041ARGCT |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Device Type | Four-port USB 3.0 hub controller | — |
| Number of Downstream Ports | 4 ports | 4 |
| SuperSpeed Maximum Data Rate | 5 Gbps | — |
| Supported USB Speeds | SuperSpeed USB, high-speed USB, and full-speed USB | — |
| Upstream Port Speed Support | Simultaneous SuperSpeed USB, high-speed USB, and full-speed USB connections | — |
| Digital Control Interfaces | GPIO, I2C, and SMBus | — |
| 3.3 V Supply Range | 3 V to 3.6 V | — |
| Low-Voltage Supply Range | 0.99 V to 1.26 V | — |
| Battery Charging Protocol | BC1.2 protocol support | — |
| Downstream Port Power Control | Downstream port power-switch control | — |
| Overcurrent Protection | Supported | — |
| Package | 64-pin VQFN (RGC), 9 x 9 mm | 64-pin VQFN (RGC) 9x9 mm with exposed thermal pad |
| Mounting Type | Surface mount | Surface Mount |
| Integrated Exposed Pad | 64-pin VQFN with exposed pad | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40C to +85C (industrial) |
| Maximum USB Data Rate | 5 Gbps | — |
| Number of Upstream Ports | 1 port | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Function | — | 4-Port SuperSpeed USB 3.1 Gen1 Hub Controller |
| USB Standard | — | USB 3.1 Gen1 / USB 3.0 (5 Gbps SuperSpeed, plus USB 2.0 LS/FS/HS) |
| Upstream Interface | — | 1x USB 3.1 Gen1 (Type-A or Type-C receptacle) |
| Data Rate (SuperSpeed) | — | 5 Gbps |
| Data Rate (High-Speed) | — | 480 Mbps |
| Configuration Interface | — | GPIO, I2C, SMBus, OTP ROM, I2C EEPROM |
| Supply Voltage (VBUS / VDD) | — | 3.3 V (single rail; internal 1.1 V core LDO) |
| Battery Charging Support | — | Yes (per-port detection via pin strap or EEPROM) |
| External Crystal | — | 24 MHz |
| MSL Level | — | 3 (168 hours) |
| Lead-Free | — | Yes |